Done Not able to build a chamber [rf tools]

I want copy a build i made (a lot of growth pulsers to my magical crops farm) and the area is like 16x16x64.
It doesnt recognize as a valid chamber shape. Got a chunk loader 3x3 just to make sure, still the same.
Tested on Single Player and it worked just fine. Does the server have any restrictions to this? If it does how much?

 

I believe we have a max side of 47 blocks (less than minimum claim + the near-claim security (Makes sure that you cant have a chamber that encompasses someones claim)).

Try placing the chamber twice, at half the size, moving 50% of it at a time.

 

Is it possible to increase the value on SkyBlock based servers? The limit of protected area is 256 and there are no claims (at least on SkyFactory)

 

Make sure nothing is blocking the connection so between point a sand b there shouldn't be a block

 

The only problem here is just the limit.

 

Last time I used the chamber there was no limit

 

What size was the chamber?

 

There are claims, they're just really, really huge and cannot be relocated. If you were to build out as far as you could, you'd hit the point where you aren't allowed to build out any further, but if you tried to use the thing there it'd go into the next player's claim. Just do what Matryoshika suggested and do it in smaller bits.

 

at least for normal infinity i can confirm this. the chamber size is smaller than the default size which you can use in singleplayer.

which makes sense, as stated above you would else be able to move someones stuff out of their claim.

 

4 turbines so what's that erm 54 including spaces inbetween so 54x54

 

maybe tear down 3 of them, make a chamber around the last one and use copy mode. the last one can be moved when done with the copys.

 

Did u use the wrench ,the card ? Does it work small scale ?

 

Claims != Island Protection
And yes it works when reducing the size.

 

try moving copying whatever piece by piece

 

does anyone know the exact sizing on infinity evolved normal?? i am attempting to make an automated base extension system using the builder but am guessing it is too big because the chamber wont complete. if someone could tell me the exact size so i could maybe divide and rotate the parts i would much appreciate it.