Done is this sopposed to be likie this?

Dieses Thema im Forum "Sky Factory 3" wurde erstellt von ignacas, 5. März 2018.

  1. ignacas

    ignacas Well-Known Member

    Beiträge:
    18
    Zustimmungen:
    2
    Ortszeit:
    17:41
    i don't know why but when i connected flux points to my energy pylons it worked till my solar panels ran out of power and now when i give it any kind of power trough those flux points it doesn't receive it i have to use some kind of conduits to give it power is there any fix or no?
     
  2. Aidoneus

    Aidoneus Director Booster

    Beiträge:
    4.447
    Zustimmungen:
    1.943
    Ortszeit:
    09:41
    Have you tried deleting the channel removing the points and setting back everything up?
     
  3. ignacas

    ignacas Well-Known Member

    Beiträge:
    18
    Zustimmungen:
    2
    Ortszeit:
    17:41
    yes i tried and it still doesn't work

    I even tried to use phantom energyface but still it did not work the only way to send energy i found was trough some kind a conduit or energy crystals but i m making a huge amount of power and they are not powerful enough to transfer it
    [doublepost=1520358771,1520348601][/doublepost]Hmm its really weird i placed dimensional transceiver and it to worked but just for a few seconds and that it stopped so i think that its a problem with energy pylon
     
  4. ignacas

    ignacas Well-Known Member

    Beiträge:
    18
    Zustimmungen:
    2
    Ortszeit:
    17:41
    is there actually no one who could help me?
     
  5. Kronnn

    Kronnn Well-Known Member

    Beiträge:
    819
    Zustimmungen:
    367
    Ortszeit:
    15:41
    To be honest I'm not sure.It might be a thing with interaction between the two mods. Have you tried to connect your flux points to them indirectly? like put some conduits on the pylon and the flux points on the conduits?
     
  6. ignacas

    ignacas Well-Known Member

    Beiträge:
    18
    Zustimmungen:
    2
    Ortszeit:
    17:41
    As i already said that i used conduits but they send such a little amount of power trough them and when i m making 100+mil RF/t its useless to do it. I need a way how i could send massive amount of power to that pylon because i want to at least try to fill that tier 8 energy core and i dont want to waste power, resources.
    [doublepost=1520508499][/doublepost]If Phantom EnergyFace would work i wouldn't have so much problems
     
  7. Kronnn

    Kronnn Well-Known Member

    Beiträge:
    819
    Zustimmungen:
    367
    Ortszeit:
    15:41
    You might have to use something like a tesseract and/or cryoducts or another high-throughput way of sending power to the core. Looking at a few places online there are indeed issues with connecting flux points to draconic energy pylons. As this is an issue at the mod level, I'm afraid we can't do much about it.
     
  8. ignacas

    ignacas Well-Known Member

    Beiträge:
    18
    Zustimmungen:
    2
    Ortszeit:
    17:41
    i would love to use cryoducts but they are only in the SF2 and not in SF3 and tesseract i tried but after some time it glitched like those fluxpoints, so i dont know any other way in SF3 that would send massive ammount of power.
     
  9. UndeadBunneh

    UndeadBunneh New Member

    Beiträge:
    1
    Zustimmungen:
    0
    Ortszeit:
    08:41
    Any solution? having the same problem. Please come ask to check out my setup
     
  10. tonalom

    tonalom Well-Known Member

    Beiträge:
    1.026
    Zustimmungen:
    523
    Ortszeit:
    16:41
    Hello UndeadBunneh,

    The issue at hand is unfortunately outside of what we can fix. The mod author resolved the issue for minecraft 1.12, but it doesn't seem like it is possible, or that they never felt the need, to resolve the issue for 1.10 (see here). So, unless the mod author makes an effort here, there is little we can do.
     

Diese Seite empfehlen