Done Living Wood/Rock AE2 Setup

Discussion in 'Agrarian Skies 2' started by knoxz, Jun 16, 2015.

  1. knoxz

    knoxz Well-Known Member

    Messages:
    612
    Likes Received:
    183
    Local Time:
    5:49 AM
    Hi there,

    I created an automated way to create living wood and rock with just applied energistics. It works as follows.
    I have 2 subsystems.

    One with an import bus on a chest and formation planes and the 2. with annihilation planes and storage bus on barrels.
    It imports the stone/wood from the chest, places it and when it is converted it will get sucked up from the annihilation planes. Only Living Wood and Rock can be imported by the annihilation planes. -> Barrels with Living rock and wood.
    For stone this setup works really good. But for wood, it does not really work at all.
    As I troubleshot it, I used a chest with a configured storage bus before I used barrels but its the same result.

    I have a problem with the system and wood of any kind. Sometimes it just vanishs. Sometimes it seems to get overriden. Sometimes it reappears and will become the wanted living wood...
    I see wood vanish, I go afk for like 5 mins. I manually place wood and it becomes like instant living wood and seems to be harvested but actually stays and does not appear in the barrel, some times it does. There are happening loads of weird stuff with wood, but for stone everything works as intended.
    If I put a stack of wood in the input chest, I'll get like 7 living wood sometimes even less.

    I tested the problem in singleplayer and it is working as intended there.
    Posted it on the AE2 buglist, but as it seems to be an issue with Cauldron I doubt they'll do much about it.
    I added the photo of my singleplayer test setup because of the better visibility

    botaniaSingleplayer.
     
  2. Slind

    Slind Founder

    Messages:
    8,332
    Likes Received:
    3,018
    Local Time:
    5:49 AM
    do you mind testing it with a forge server? (you can use your sp save)
     
  3. knoxz

    knoxz Well-Known Member

    Messages:
    612
    Likes Received:
    183
    Local Time:
    5:49 AM
    sure. give me 15 mins[DOUBLEPOST=1434411221][/DOUBLEPOST]also working with a local server.
    Although it does sometimes plob as if the block is converted + replaced, but nothing happens. no wood is replaced or vanishing.

    Edit again:

    Still might be a forge server issue... It just stoped working. I did not change anything and it stopped importing the living wood.[DOUBLEPOST=1434415110][/DOUBLEPOST]NVM......

    I think a found another AE2 issue with all the testing, but the issue I described was just a big derp on my side.....
    Closed.
     
    Last edited: Jun 16, 2015
    Slind likes this.

Share This Page