Hello, fellow MyM players. I have made a ComputerCraft script which works in sync with the CC script made by asidjazz (The Discussion) So what it simply does, it increases the RF/t on Output gate, not going above the temps of 7000 degrees in Celsius. It's not fully automatic though. I'd recommend to increase the power yourself to where the reactor reaches the temps at about 7000C, because the process of changing the numbers is slow, but it works well after that. Here is the code: pastebin get xgZPA247 startup Here's how it's set up: The Computer above is the one, that is for the Script, one below is made for the asidjazz script. If you have any questions, or ideas what i should change, or could do more efficiently, please let me know. I'm not a CC professional, so i'm not sure if im doing it right. The script has been running fine for me for the past time and has not made any issues, works perfectly.